Stirrer Accessories
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Ace Glass, Inc. Stirring shaft, 19mm, 37in, solid glass, polished, drilled type, bottom hole only
Stirring shaft, 19mm, 37in, solid glass, polished, drilled type, bottom hole only
Electron Microscopy Sciences Lower Shaft Assembly for Model 865 Diamond Band Saw
For use with Model 865 Daimond Band Saw (50182-65).
Cole-Parmer Keyless Chuck for 5/16" Mixer Motor Shaft
Keyless Chucks let you securely fasten the mixing shaft to the mixer without a key.
Cole-Parmer 316 Stainless Steel Shaft, 3/8" dia x 18"L (accepts a 5/16" bore dia propeller)
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Chemglass Life Sciences Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 29/42 Inner Joint
Stirrer Bearing,Macro, Jacketed, Glass, for 10mm Shaft, 29/42 Inner Joint. Similar to CG-2070, but water jacketed to control bearing temperature. For use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 1 to 2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 1000mL-2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 337mm OAH, for 8L VSA
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 400mm OAL, for 100mL to 250mL Reactors, 42mm OD Agitator
Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 400mm OAL, for 100mL to 250mL Reactors, 42mm OD Agitator. Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Button Style, for 1000 to 5000mL Flasks, 585mm OAL
Stirring Shaft, 19mm, Polished, Button Style, for 1000mL to 5000mL Flasks, 585mm OAL. A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Glass Agitator, Three-Blade, 570mm OAL, for 2000mL Reactors, 105mm OD Agitator
Stirring Shaft, 19mm, Polished, Glass Agitator, Three-Blade, 570mm OAL, for 2000mL Reactors, 105mm OD Agitator. Shaft is precision ground and polished to fit our CG-2086 19mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward.PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Ace Glass, Inc. 10mm 44cm solid glass stir shaft, polished, button type
10mm O.D. polished glass stirring shaft; button type. Length: 44cm. Use with only ACE PTFE stirrer bearings. Shafts accept 316 SS multi-paddle or turbine agitators secured with set-screw on ground flat section.
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 368mm OAH, , for 15L VSA
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences Stirrer shaft, polished glass, 19 mm, 90° four-blade agitator - 630 mm OAL (for process and filter reactors)
Polished 19 mm diameter glass stirrer shaft with a 90° four-blade agitator, 105 mm OD and 18 mm blade width, and 630 mm overall length. Designed for process and filter reactors and to operate with PTFE bearings for reduced abrasion and vacuum-tight sealing.
- 19 mm precision ground and polished glass shaft.
- Four-blade 90° glass agitator with 105 mm outer diameter and 18 mm blade width.
- Overall length 630 mm suitable for mid-size reactor vessels.
- Designed for use with PTFE bearings to minimize abrasion and help maintain vacuum-tight seals.
- Intended for process and filter reactors and compatible with standard reactor support frames.